Request a callback
- Have a question? Leave your number and we'll call you back
Request callbackProduct code: BAC-UL5
75T Five Column, Commercial Vehicle In-Ground Lift
75T Five Column, Commercial Vehicle In-Ground Lift
This 75T five column, in-ground lift is designed for workshops specialising in commercial vehicles and is ideally suited to tractor units and buses with a single front axle and up to three rear axles.
Its innovative design allows for one column to be fixed and the remaining columns to be remote controlled and positioned at any point to suit the vehicle's lifting points.
When not in use, the columns lay completely flat allowing the entire workshop area to be used as normal. The protective covers can withstand an impressive drive-over load of 7T.
The lift is operated using a modern touch-screen hand control. In the event of any errors the system can be remotely accessed and interrogated to ensure a quick first-time resolution.
The entire system is plug & play, and is supplied as a complete pre-assembled product. Simply excavate, prepare the pit, lower in the equipment and back-fill. This system is quick to install and commission, and every installation is carefully overseen at every stage by our experienced team.
Features
- Innovative and flexible design allows for the lifting of all types of commercial vehicles and trailers
- Plug & Play - Factory tested with columns mounted in a hot galvanized cassette ready for installation
- When not in use, all cross beams and the rolling cover are lowered to floor level along the total pit length providing a completely flat workshop area
- One column is fixed and the remaining columns are adjustable by remote control
- The lift is operated from an easy-to-use touch screen remote control which, among other things, informs the user of the lifting height and load
- Double nickel surface treatment protects the columns against corrosion and ensures a long life
- 2 independent hydraulic circuits in each lifting column offer optimum safety - one circuit can hold the entire load if necessary
- CE certified - complies with European Standard EN 1493
Expertise
With over 35 years of experience & more than 5,000 garages using our products, we have the knowledge & expertise to advise you on all your workshop needs.
Project Management
Installing a new test lane or large service equipment can be a daunting project. Boston will provide project management and assistance every step of the way to ensure maximum efficiency and an on time completion. With our detailed timeline of the works and installation you’ll be able to plan your business around it and minimise any disruption.
Installation
Our Garage Equipment Association (GEA) accredited and qualified engineers will install your equipment and provide demonstrations as required. While we’re there, we’ll answer any questions you may have regarding operation and maintenance, and we’ll also share our best practices to ensure longevity.
Ongoing Support
Once you’re up and running, we'll continue to provide you with ongoing customer support. We offer a variety of maintenance and calibration contracts to keep your equipment in the best working order and maximise its operational life.
| Specifications | |
|---|---|
| Capacity | 5 x 15T |
| Stroke | 1900 mm |
| No. of columns | 5 |
| No. of moveable columns | 4 |
| Cassette length | 20000 mm |
| Cassette width | 1030 mm |
| Lifting points distance | 1300 - 19025 mm |
| Speed lifting / lowering | 80s |
| Power | 30kW |
| Oil required per column | 25L |
| Weight | 11T |
Customer reviews
Nobody has left a review for this product yet, be the first to do so.
This 75T five column, in-ground lift is designed for workshops specialising in commercial vehicles and is ideally suited to tractor units and buses with a single front axle and up to three rear axles.
Its innovative design allows for one column to be fixed and the remaining columns to be remote controlled and positioned at any point to suit the vehicle's lifting points.
When not in use, the columns lay completely flat allowing the entire workshop area to be used as normal. The protective covers can withstand an impressive drive-over load of 7T.
The lift is operated using a modern touch-screen hand control. In the event of any errors the system can be remotely accessed and interrogated to ensure a quick first-time resolution.
The entire system is plug & play, and is supplied as a complete pre-assembled product. Simply excavate, prepare the pit, lower in the equipment and back-fill. This system is quick to install and commission, and every installation is carefully overseen at every stage by our experienced team.
Features
- Innovative and flexible design allows for the lifting of all types of commercial vehicles and trailers
- Plug & Play - Factory tested with columns mounted in a hot galvanized cassette ready for installation
- When not in use, all cross beams and the rolling cover are lowered to floor level along the total pit length providing a completely flat workshop area
- One column is fixed and the remaining columns are adjustable by remote control
- The lift is operated from an easy-to-use touch screen remote control which, among other things, informs the user of the lifting height and load
- Double nickel surface treatment protects the columns against corrosion and ensures a long life
- 2 independent hydraulic circuits in each lifting column offer optimum safety - one circuit can hold the entire load if necessary
- CE certified - complies with European Standard EN 1493
| Specifications | |
|---|---|
| Capacity | 5 x 15T |
| Stroke | 1900 mm |
| No. of columns | 5 |
| No. of moveable columns | 4 |
| Cassette length | 20000 mm |
| Cassette width | 1030 mm |
| Lifting points distance | 1300 - 19025 mm |
| Speed lifting / lowering | 80s |
| Power | 30kW |
| Oil required per column | 25L |
| Weight | 11T |
Customer reviews
Nobody has left a review for this product yet, be the first to do so.